Hans Grohe 32070XX1 Instrução De Montagem

3

Position the faucet and sealing ring in place on the 

mounting surface.

From below the mounting surface, install the friction 

washer, metal washer and mounting nut.  Tighten the 

mounting nut by hand.  Tighten the tensioning screws.

Install the pull rod.

Connect the supply hoses to the stops with 3/8” 

compression fittings (not included).  Use two 

wrenches, as shown in the diagram, to keep the 

supply hoses from twisting or becoming loosened 

from the faucet.

Install the pop-up drain.

Turn on the water.  Check all connections for 

leaks.

Reset the high temperature limit stop, if desired.

sealing ring

friction washer

metal washer

mounting nut

tensioning screw

pull rod