Hearth & Home Technologies 21M-ACC Manual Do Utilizador

September 1, 2008

7039-131F

Page  1

R

1. Remove the  bolts (1/4”-20 Phillips head) on the outer 

skin at the bottom rear of appliance.

2. Align holes in mounting flange of blower with bolt holes in 

appliance. Blower should be positioned at bottom of rear 

outer skin as shown in 

Figure 13.1.

. Re-insert  and  tighten  bolts,  securing  blower  onto  outer 

wall of appliance.

4. Place  the  bracket  containing  the  snap  disc  and  magnet 

under the bottom left rear corner as shown in 

Figure 13.1. 

 

See  page  25  for  detailed  operating  instructions  for  the 

blower and snap disc.

Shock Risk.

•  Do NOT remove grounding prong from plug.
•  Plug directly into properly grounded  prong 

receptacle.

•  Route cord away from appliance.
•  Do NOT route cord under or in front of appliance.

 

MANUAL: Over-rides the 

Snap Disc 

AUTO:  Fan will turn ON/OFF 

Automatically by the Snap Disc 

Controls the Fan Speed 

Snap Disc 

Bracket  

with Magnet 

MANUAL 

FAN 

AUTO 

LOW 

HIGH 

OFF 

Secure wires 

with wire tie