Ramsey Electronics SHA1 Manual Do Utilizador
SHA1
• 16
TESTING THE SHA1
You will need the following equipment for this test.
You will need the following equipment for this test.
Audio source such as signal generator, CD player, or
tape deck.
tape deck.
RCA jacks to feed audio to the SHA1
Good quality headphones.
A 9 volt battery or DC power supply
Simply connect your SHA1 up as if you were going to use it.
1. Connect your signal source to the two RCA jacks on the
SHA1.
SHA1.
2. Hook up the 9V battery or power supply.
3. Turn the volume controls all the way counter clockwise.
4. Plug in your earphones.
5. Slowly turn up the volume slowly on each channel.
6. Use your ears and the troubleshooting guide to determine
if the unit works
if the unit works