Samson C com 16 Manual Do Utilizador

ENGLISH

4

1   PROGRAM LED’S 1- 8 – When illuminated, indi-

cates the associated Program (1-SMOOTH VOCAL, 
2-AGGRESSIVE VOCAL, 3-BASS, 4-SLAP BASS, 5-
ACOUSTIC, 6-FUNK GUITAR, 7-SUSTAIN, 8-PERC 1) is 
selected.

2   PROGRAM LED’S 9-16  – When illuminated, indi-

cates the associated Program (9-PERC 2, 10-SOFT, 
11-DYNAMIC, 12-ENHANCED, 13-STEREO COMP, 
14–STEREO LIMIT,15-STEREO MASTER,16-MANUAL) is 
selected.

3   PROGRAM SELECTOR – Rotary encoder control 

knob used to select the 16 Programs.

4   GAIN REDUCTION METER  - Displays the amount of 

Gain Reduction when Compressor circuit is activated.

5   SENSITIVITY - Used to set the minimum signal level 

at which the Compressor circuit begins to function.

6   RATIO - Controls the amount of Gain Reduction in 

proportion to the amount of signal over the selected 
threshold level. 

  
7   RELEASE - Selects the amount of time  the com-

presssor takes to return the signal  to the orignal 
level. 

 8   OUTPUT - Used to set the final level after the com-

pression circuit is applied.

9   INPUT/OUTPUT METER -  Six segment LED meter 

displays the Input or Output signal level based on 
the settings of the I/O meter switch.

10   MAINS POWER SWITCH - 

When switched on, the 

green LED will light, indicating the C com 16 is 
powered on and ready for operation.

11   ENHANCER - Activates the C com 16’s Enhancer cir-

cuit which restores the high end loss resulting from 
extreme Gain Reduction.

12   ATTACK - Adjusts the amount of time the compres-

sor takes to reach full gain reduction .

13   BYPASS - Used to switch the C com 16’s compression 

circuit on and off.  The C com 16  is engaged when 
the BYPASS LED lights green.  

 - Selects 

either Input or Output level to be displayed on the 
Input/Output Meter.