Philips FW-D1 Manual Do Utilizador

3139 115 20054

37

You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER, etc.).
The clock will be displayed for about seven
seconds.

• Press CLOCK/TIMER briefly.

™ "PM 10:38 or 22:38" (the

current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.

™ "--:--" will be displayed if the

clock is not set.

The clock can be set in either 12- or 24-
hour mode, e.g.  "

AM 12:00" or

"

00:00". Before setting the clock, you

must be in the View Clock mode.

1 Press CLOCK/TIMER to select clock

mode.

2 Press PROG 

(on the system only) to

select 12- and 24- hour mode.
™ If 12-hour mode is selected,

"

AM 12:00" starts flashing.

™ If 24-hour mode is selected, "00:00"

starts flashing.

3 Set the hour with à or á on the

system.

4 Set the minute with í or ë on the

system.

DVD MINI HIFI SYSTEM

-

PRESET ▲

▲

If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.

1 Press AUX (CDR) to select the CDR

mode.
™ "CDR" will be displayed.

2 Press AUX (CDR) again to select

external (normal AUX) mode.
™ "AUX" will be displayed.

Notes:
– There are two Auxiliary modes:

i. the normal AUX mode.
ii.  the CDR mode, where the LINE OUT

of this mini system is muted. You will
not be able to record or listen to the
sound from the LINE OUT.

– You are advised not to listen to and

record from the same source
simultaneously.

– All the sound control features (e.g. DSC,

DBB, etc.) are available for selection.

DVD MINI HIFI SYSTEM

-

PRESET ▲

▲

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

37