Blaupunkt 3.3 Manual Do Utilizador

68

•

  3D auto zoom

–  Select whether you desire auto 

zoom or no auto zoom as de-
fault in 3-D view during a navi-
gation.

•

  2D auto zoom

– Select whether you desire 

low auto zoom, standard auto 
zoom, high auto zoom or no 
auto zoom during a navigation 
with 2-D view.

For 2-D and 3-D auto zoom, the 
zoom depth is changed in refer-
ence to your speed: If you travel 
slowly, the scale becomes smaller. 
If you travel faster, the scale be-
comes larger. The deeper the auto 
zoom, the smaller the scale of the 
map.

•

  2D-view

–  Select whether the map should 

be oriented to the north or in 
driving direction by default dur-
ing a navigation with 2-D view.

In the Time zone menu, you can set 
the time zone that is valid for your 
position. This setting is important for 
the correct calculation of estimated 
arrival times.

•

Touch this fi eld to set the time 
zone valid for your position.

•

Touch this fi eld to toggle between 
daylight savings time (button with 
check mark) and winter time (but-
ton without check mark).

Note: 

If the time is changed at your loca-
tion or if you drive into a different 
time zone, you must adjust the 
corresponding settings.

In the Format menu you can specify 
which units of measure should be 
used for times and distances and the 
language to be used for the menus 
and voice output of the Lucca.

➜

➜

Lucca3_3_long_GB.indd   68

Lucca3_3_long_GB.indd   68

18.10.2006   15:05:31 Uhr

18.10.2006   15:05:31 Uhr