Novatel OM-20000149 Manual Do Utilizador

Página de 66
NovAtel Firmware and Software
Chapter 5
AG-STAR User Manual Rev 2
35
5.1.2
Model Upgrades
Model upgrades enable purchased receiver features.
Contact a local NovAtel dealer to assist in selecting the upgrade options that best suit your GNSS needs at 
 or 
 to request a temporary 
upgrade authorization code for trial purposes.
The receiver stores the firmware in Non-Volatile Memory (NVM), which allows model upgrades to be 
performed without returning the receiver to the dealer. Model upgrades can be applied to the receiver with an 
authorization code and the 
AUTH
 command.
5.2
Authorization Code
An authorization code, commonly known as an auth-code, is required to upgrade and possibly update an 
AG-STAR receiver. Auth-codes are obtained by contacting 
. Upon contact, 
NovAtel Customer Support requires:
the receiver model number
the receiver serial number
the receiver firmware version
Enter the 
LOG VERSION
 command to determine the receiver model, serial number and firmware version.
Example:
After determining the appropriate model and firmware version the authorization code (auth-code) is issued. 
The auth-code is required to unlock the features on the new model type.
To upgrade to a new model with the same firmware version, use the 
AUTH
 command with the issued auth-
To upgrade to a new model with a higher firmware version, the new firmware .HEX file needs to be loaded 
into the AG-STAR receiver using the WinLoad utility program. WinLoad and the firmware .HEX files can be 
found at 
. Refer to 
The procedure for loading firmware is the same. Refer to Section 5.5, Upgrading Using the 
AUTH Command
 on page 40
.
An authorization code is still required if the software model changes for temporary trial 
upgrades or purchased permanent upgrades.
Product
Firmware
Release
Indicator
Family
Number
Serial
Model
Number
Number
F
IRMWARE
ENTER
Version
Hardware
Version
GPSCARD “LXGMTSA” “DHD13302094” “M6XV1G-2.02-TT” “L6X010106RN0000”