HP (Hewlett-Packard) 1.16 Manual Do Utilizador
Hardware and firmware requirements 4
Hardware and firmware requirements
HP Virtual Connect Manager firmware
The latest HP Virtual Connect Manager firmware package (version 1.16) contains the following firmware
versions:
versions:
•
HP 1/10Gb VC-Enet version 1.16
•
HP 4Gb VC-FC version 1.02
IMPORTANT:
The VC-Enet module firmware must be updated to version 1.15 before updating
the VC-FC module firmware. Otherwise, the VC-FC firmware might not appear to be
successfully updated.
Supported hardware
Versions 1.15, 1.15b, and 1.16 of HP Virtual Connect firmware support the following hardware:
•
Virtual Connect modules
o
HP 1/10Gb Virtual Connect Ethernet Module
o
HP 4Gb Virtual Connect Fibre Channel Module
•
Server blades
o
HP ProLiant BL460c Server Blade
o
HP ProLiant BL480c Server Blade
o
HP ProLiant BL465c Server Blade
o
HP ProLiant BL685c Server Blade
o
HP Integrity BL860c Server Blade (only supported by Virtual Connect v1.16)
•
HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
•
Integrated Network Interfaces and mezzanine cards
o
HP BladeSystem Dual NC370i Multifunction Network Adapter
o
HP NC373i Integrated Multifunction Gigabit Server Adapter
o
HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o
HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
o
HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
o
HP NC325m PCI Express Quad Port Gigabit Server Adapter
o
HP QLogic QMH2462 4Gb FC HBA for c-Class BladeSystem
o
HP Emulex LPe1105-HP 4Gb FC HBA for c-Class BladeSystem (Microsoft® Windows® and
VMware ESX 3.01)
VMware ESX 3.01)