Lucent Technologies Release 7 Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-763
ETH-PT (Control LAN Ethernet)
9
ETH-PT (Control LAN Ethernet)
The TN799 Control LAN (CLAN) packet port circuit pack provides TCP/IP
connection to adjuncts applications such as CMS, Intuity, and DCS Networking.
The CLAN circuit pack has one 10baseT Ethernet connection and up to 16 DS0
physical interfaces for PPP connections. Multiple CLAN circuit packs (maximum
2 per switch) in a system gives additional TCP/IP capacity.
connection to adjuncts applications such as CMS, Intuity, and DCS Networking.
The CLAN circuit pack has one 10baseT Ethernet connection and up to 16 DS0
physical interfaces for PPP connections. Multiple CLAN circuit packs (maximum
2 per switch) in a system gives additional TCP/IP capacity.
A remote socket control link (RSCL) links the CLAN and the SPE to pass call
control and other management information. Since one link serves all the ports on
the circuit pack, maintenance of the RSCL is part of the CLAN circuit pack
maintenance.
control and other management information. Since one link serves all the ports on
the circuit pack, maintenance of the RSCL is part of the CLAN circuit pack
maintenance.
NOTE:
The CLAN TN799 circuit pack replaces the PGATE and PI circuit packs in
the G3r and G3si/G3vs systems, respectively. The PGATE or PI can be
used with the CLAN to create an X.25-to-TCP/IP bridge for adjunct and
DCS connections.
the G3r and G3si/G3vs systems, respectively. The PGATE or PI can be
used with the CLAN to create an X.25-to-TCP/IP bridge for adjunct and
DCS connections.
Control LAN Congestion Controls
The switch activates congestion controls on CLAN when it detects buffers
exceeding the threshold. The switch releases the congestion controls when the
CLAN reports that its buffer level has returned to normal levels.
exceeding the threshold. The switch releases the congestion controls when the
CLAN reports that its buffer level has returned to normal levels.
MO Name (in
Alarm Log)
Alarm Level
Initial Command to Run
1
1.
UU is the universal cabinet number (1 for PPN, 2 - 44 for EPNs). C is the carrier designation (A, B,
C, D, or E).
C, D, or E).
SS is the number of the slot in which the circuit pack resides (01 to 21). pp is the two
digit port number (01, 02, ...).
Full Name of MO
ETH-PT
MAJOR
test port UUCSSpp long
MO_ETH_PT
ETH-PT
MINOR
test port UUCSSpp long
MO_ETH_PT
ETH-PT
WARNING
test port UUCSSpp
MO_ETH_PT
If congestion:
Then the switch:
Persists for a 14-minute interval,
Raises MINOR alarm.
Exhausts buffers,
Raises MINOR alarm.
Ceases for 12 minutes,
Retires MINOR alarm.