Lucent Technologies Release 7 Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Object Repair Procedures
9-1340
PRI-CDR/SEC-CDR (Call Detail Recording Link)
9
Link Retry Test (#215)
This test sends a message to the CDR software process to make a data call to
the extension where the CDR output device connects to. If the CDR link is
already up, then this test will be passed without making any data call.
the extension where the CDR output device connects to. If the CDR link is
already up, then this test will be passed without making any data call.
1010
ABORT
The CDR link has been busied out to out-of-service.
1. Enter the release cdr primary|secondary command to release the
CDR link from busyout state.
2. Retry the test cdr primary|secondary long command to execute the
test.
2012
ABORT
Internal system error.
1. Retry the command at one-minute intervals a maximum of 5 times.
FAIL
Internal system error.
1. Retry the command at one-minute intervals for a maximum of 5 times.
PASS
The CDR link is torn down.
Table 9-525.
TEST #215 Link Retry Test
Error
Code
Code
Test
Result
Description/ Recommendation
10
ABORT
Internal system error.
20
ABORT
Internal system error.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
30
ABORT
Internal system error.
1. Refer to ‘‘Procedures for Restoring the CDR Link’’ for instructions.
1010
ABORT
The CDR link has been busied out to out-of-service.
1. Enter release cdr primary|secondary command to release the CDR
link from busyout state.
2. Retry test cdr primary|secondary long command to execute the
test.
Continued on next page
Table 9-524.
TEST #213 Link Tear Down Test
Error
Code
Code
Test
Result
Description/ Recommendation
Continued on next page