Lucent Technologies Release 6 Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-12
Set Country Options
3
Set Country Options
Certain country options need to be set to turn red failure indication LEDs off.
1. Verify the screen displays:
Command:
2. Type change system-parameters country options
and press
Enter.
A screen similar to
Screen 3-2
is displayed on the terminal. The cursor is
set on the
Companding Mode
line.
Screen 3-2.
Typical System Parameters Country-Options Screen
3. The default companding mode is
µ
-Law. If the country uses A-Law
companding, type A-Law.
4. Press
Enter
when this information is correct.
Other items eventually need to be entered on this screen, but this is all that
must be done to turn the red alarm LEDs off. Refer to
must be done to turn the red alarm LEDs off. Refer to
for a list of
the country codes.