3com DSA-3CV1100-02 Manual Do Utilizador
30
C
HAPTER
2: I
NSTALLING
THE
VCN A
CCESS
C
ONCENTRATOR
Connecting Cables to
the Rack Via Patch
Panel
The process of connecting cables to the rack varies depending on
whether or not a patch panel is used. The procedure of connecting the
punch-down blocks to the patch-panel is described in
whether or not a patch panel is used. The procedure of connecting the
punch-down blocks to the patch-panel is described in
Back Panel Connections
To connect the back panel of the VCN AC, use the 2 flat cables with RJ-21
connectors supplied with the VCN AC.
connectors supplied with the VCN AC.
To connect the VCN AC to the patch-panel, perform the following steps:
1 Connect the RJ-21 connector labeled “FROM VCN AP” at the back of the
VCN AC to the “FROM VCN AP” connector on the front of the patch
panel using one of the 50-pin twisted pair flat cables.
panel using one of the 50-pin twisted pair flat cables.
2 Connect the RJ-21 connector labeled “TO PBX” at the back of the VCN
AC to the “TO PBX” connector on the front of the patch panel using the
second 50-pin twisted pair flat cable.
second 50-pin twisted pair flat cable.