iiyama H2130 Manual Do Utilizador

ENGLISH

F Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.

NOTE

n When the left side of the picture frame moves away from the left edge of the display

area during the Clock adjustment, adjust Clock and H-Position alternately.

n Another way to make the Clock adjustment is to correct the vertical wavy lines in the

zebra pattern.

n The picture may flicker during the Clock, H-Position and V-Position adjustment.

n In case the picture frame is bigger or smaller than the data display area after the Clock

adjustment, repeat steps from C.

n In the case that a strong flicker or blurs remain on a part of the screen, repeat the

adjustments from E to readjust the Clock. If the flicker or blurs still remain then set the
refresh rate to 60Hz and repeat the adjustments from step C.

n Adjust the H-Position after the Phase adjustment if the horizontal position moves

during the adjustment.

C Press the Auto Set-up Button.

D Adjust the image manually by following procedure below when the screen has a

flicker or blur, or the picture does not fit in the display area after performing the Auto
Set-up.

E Stretch the right side of the picture frame to the right edge of the display area by

adjusting the Clock.

G Select “Position” in the Adjustment Program and adjust the H-Position and V-Position

s o that the frame of the cross-hatch pattern fits into the display area.

OPERATING THE MONITOR 23