HTC LZC5225 / 965879601 Manual Do Utilizador

MAINTENANCE

Husqvarna 

- 

47

8011-601-1

1. Front eyebolt
2. Front locknut
3. Rear locknut
4. Rear eyebolt
Leveling the mower deck

Position the mower on a level, preferably 

1. 

concrete, surface.
Check the pressure in all four tires. See 

2. 

“Technical Data”.
Rotate blades to align front to back.

3. 

Set the cutting height to 4".

4. 

Measure front blade tip, should be 4" from 

5. 

ground, if not turn locknut on top of front 

eyebolt till measurement is achieved. Check 

blade tip at front on opposite front blade. Adjust 

locknut on front eyebolt as necessary.
Check rear blade measurement, should be 

6. 

4¼" from ground, if not turn locknut on top of 

rear eyebolt to achieve measurement. Repeat 

procedure on opposite side.

Raise and secure the deck height lever to the 

1. 

transport position (6").
Position blade tip so it is straight forward.

2. 

Measure from the cutting edge of the blades to 

3. 

a flat level surface. The distance should be 6" 

(150 mm).
Drop and secure the lever at (for example) 

4. 

the 2" cutting height. Measure as above. The 

distance should be 2" (50 mm).

8011-601-1

1

2

3

4