HTC LZC5225 / 965879601 Manual Do Utilizador

LUBRICATION

52

 - Husqvarna

8011-471

8009-159

The importance of checking and maintaining 

the proper oil level in the crankcase cannot be 

overemphasized.
Check oil before each use as follows:

Make sure the engine is stopped, level, and 

1. 

cool so the oil has had time to drain into the oil 

pan.
To keep dirt, debris, etc., out of the engine, 

2. 

clean the area around the dipstick before 

removing it.
Unthread and remove the dipstick; wipe oil off. 

3. 

Reinsert the dipstick into the tube and rest the 

cap on the tube. Do not thread the cap onto 

the tube.
Pull the dipstick out and check the oil level. 

4. 

The oil level should be up to, but not over, the 

“FULL” mark on the dipstick.
If the level is low, add oil of the proper type, up 

5. 

to the “FULL” mark on the dipstick. Refer to Oil 

Type. Always check the level with the dipstick 

before adding more oil.