Jacuzzi J - 480 Manual Do Utilizador

Page 73

To destroy bacteria and organic compounds in the spa water, a sanitizer 

must be used regularly. Chlorine and bromine are the two most popular 

sanitizers used to date. The “Proclear Mineral Spa Clarifier” designed 

especially for your hot tub is a beneficial product for water maintenance. 

Many other additives are available for your spa. Some are necessary to 

compensate for out-of-balance water; some aid in cosmetic water treatment 

and others simply alter the feel or smell of the water. Your authorized Jacuzzi 

dealer can advise you on the use of these additives. When adding spa 

shock (chlorine or non-chlorine) or pH balancing chemicals activate the 

jets pump(s) and leave the spa cover open for a minimum of 20 minutes. 

By doing this you will allow excessive chemical vapors to exit the spa, 

protecting pillows and plastic knobs from chemical attack.

  

Never leave your hot tub unattended for any reason while the 

cover is open and accessible, especially to small children and 

animals!

Never add chlorine tablets (trichlor) or acid to your hot tub for 

any reason! These chemical may damage components within 

your hot tub, burn or irritate your skin, create a rash and void 

the manufacturer warranty for your spa.

!

Many other additives are available for your spa. Some are necessary 

to compensate for out-of-balance water, some aid in cosmetic water 

treatment and others simply alter the feel or smell of the water. Your 

authorized Jacuzzi dealer can advise you on the use of these additives.

This system is optional on North American models and standard 

equipment on export 50 Hz models. If your spa is equipped with the 

Jacuzzi CD ozone water purification system you will find that your water 

stays fresh and clear with significantly less chemical usage. You will 

probably be able to go longer between complete spa drainings. 

note: To maximize sanitation benefits from this product, always turn off 

the spa waterfall valve when the spa is covered or not in use. This setting 

ensures maximum water flow through the ozone injector and higher 

ozone concentrations. The ozone only runs when the circulation pump 

is running and shuts off when either jets pump is manually activated 

during spa use. The ozone will remain off for 5 minutes after both jets 

pumps time out or are manually turned off, then resume operation as 

programmed.