Nilfisk-Advance America E 130.2 Manual Do Utilizador

13

WARNING! Always disconnect 
the electrical plug from the 
socket prior to maintenance or 
cleaning. 
To ensure a long and problem 
free working life, please take 
the following advice:

 Wash out water hose, high 

pressure hose, spray lance 
and accessories before 
mounting.

 Clean the connectors of dust 

and sand. Make sure that no 
sand or dirt is blocking the 
movement of the pawl on the 
Click & Clean spray lance.

 Rinse the detergent spraying 

attachment after use.

 Clean the nozzles.

Any repair should always be 
made in an  authorized work-
shop with original spare parts.

Clean the water inlet fi lter regu-
larly once a month or more fre-
quently according to use. Care-
fully loosen the fi lter with a pair 
of pliers and clean it. Check that 
it is intact before re-mounting it. 

The inlet fi lter must always be 
fi tted inside the water inlet pipe 
to fi lter out sand, limestone and 
other impurities, as they will 
damage the pump valves.

CAUTION: Failure to fi t the fi lter 
will invalidate the guarantee.

A clogging up in the nozzle 
causes a pump pressure which 
is too high. This is why cleaning 
is required immediately.
 
1. Stop the machine and dis-

connect the  nozzle. 

2. Clean the nozzle. IMPOR-

TANT: The cleaning tool (11) 
should only be used when 
the nozzle is detached!

3. Flush the nozzle backwards 

with water.

The machine should be kept 
clean so as to let cooling air 

To ensure an easy connec-
tion and that o-rings do not 

pass freely through the ma-
chine vents.

dry up, the couplings should be 
greased regularly.