Vocopro DA2277 Manual Do Utilizador

Página de 26
10
DIGITAL KEY CONTROLLER
Digital Key Control Mixer with/Dual Rechargeable Wireless Mic System
POWER
Down
Vocal Partner Vocal Cancel  A/V Source
Normal
Up
Music
0
0
0
0
5
10
10
0
-15
+15
0
-15
+15
0
10
0
10
9
Mic 4 Input
Mic 3 Input
Remote
Key Control
Delay
Mic Master Volume
Repeat
Bass
Treble
Digital Echo
Mic 4
Mic 3
Mic 1 
(wireless)
Mic 2 
(wireless)
Echo On
Echo On
Echo On
8
12
11
13
9
10
TOP VIEW OF DA-2277
14
Front/Top Panel Descriptions and Controls
 8. MIC BASS AND TREBLE controls
 – These controls adjust the low and high frequency levels for all 
     microphone output. turn clockwise to increase and counter- clockwise to decrease. 
 9. DIGITAL ECHO, REPEAT AND DELAY controls 
–The DIGITAL ECHO, REPEAT and DELAY controls 
     adjust the DA-2277’s processing of DIGITAL ECHO. The DIGITAL ECHO, DELAY and REPEAT knobs will 
     alter the levels of effects on all 3 Mic channels simultaneously. The DIGITAL ECHO knob controls the 
     overall echo applied to the 3 Mic channels, the DELAY knob controls the interval time between each echo 
     and the REPEAT knob controls the # of times the echo will repeat. For all 3 effects knobs, turn clockwise   
     to increase and counter- clockwise to decrease. 
10. MIC 3 AND 4 jacks
- These 1⁄4 inch input jacks are for connecting microphones or instruments. 
11. REMOTE KEY CONTROL jack
 – This jack is for connecting the 1/8" plug found on a key controllable 
      microphone. After plugging the in the microphone, you can control the DIGITAL KEY CONTROLLER with 
      the key controls located on the microphone. 
12. MIC 1, 2, 3 AND 4 LEVEL controls
 –These knobs control the MIC CHANNELS output levels
      individually. This makes it possible to adjust just one Mic channel without affecting the other 3 channels.   
      This can be useful when one person or (Mic channel) might be overpowering others in a duo or trio. Turn   
      clockwise to increase output levels, and counter-clockwise to decrease output levels. 
13. DIGITAL ECHO ON/OFF button
 – Microphone channels 1, 3 and 4 have one of these buttons. 
      By pressing it, you activate the DIGITAL ECHO for that channel. By depressing it, you remove the 
      DIGITAL ECHO from that channel. 
      NOTE:
 Microphone channel 2 does not have an ECHO ON/OFF switch as that channel is used as a "dry" 
                  (no echo) microphone channel. 
14. MICROPHONE CHARGING terminals
 – These terminals are for charging the microphones when they   
      are not in use. Place microphone in the terminal and twist it clockwise till it "clicks" into position.