Vocopro DA2277 Manual Do Utilizador

 

Things to Consider

It is very important to read the following instructions prior to starting any installation 
procedures. Doing so will ensure a correct installation and may save you some time as well.

• Connect all external components before you plug any of their power cords into the 
   wall outlet.
• Turn off the DA-2277 before you connect or disconnect any cables.
• Make sure all cables are properly grounded.

• Don’t block ventilation holes. Arrange any components so that air can circulate freely.
• Don’t stack components.
• If you place the DA-2277 on a stand, make sure you allow adequate ventilation.

• Insert each cable firmly into the designated jack.
• If you place components above the DA-2277, route all cables down the side of the 
  back of the DA-2277 instead of straight down the middle of the back of the 
  DA-2277.

Choose the location for your DA-2277 carefully. If the DA-2277 is placed on a stand or 
base, ensure that it is of adequate size and strength to prevent it from being accidentally 
tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the 
DA-2277.

First carefully unpack all of the box contents. You should 

have found the following items with your new DA-2277:

 DA-2277 Receiver

 Wireless Microphone Transmitters

 RCA A/V Patch Cables

Four-Pack of AA Rechargeable Batteries 

Mounting Brackets

 Mounting Bracket Screws