Datalogic Scanning I GD4100 Manual Do Utilizador

Label ID

Product Reference Guide

To configure a Label ID individually for a single symbology:

1. Scan the ENTER/EXIT barcode.

2. Select Label ID position as either BEFORE (Enable as Prefix) or AFTER (Enable as suf-

fix) by scanning the appropriate barcode in the section "Label ID Control"on page

117

.

Reference 

Figure 9

 for Label ID positioning options if multiple identification features are 

enabled.

3. Scan a barcode to select the symbology for which you wish to configure a custom Label 

ID from the section 

Label ID Symbology Selection, starting on page 118

.

4. Determine the desired character(s) (you may choose up to three) which will represent the 

Label ID for the selected symbology.

5. Turn to the 

ASCII Chart

 on the inside back cover of this manual and find the equivalent hex 

digits associated with your choice of Label ID. For example, if you wish to select an equal 
sign (=) as a Label ID, the chart indicates its associated hex characters as 3D. Turn to 

Keypad, starting on page 301

 and scan the barcodes representing the hex characters deter-

mined. For the example given, the characters ‘3’ and ‘D’ would be scanned. More exam-
ples of Label ID settings are provided in Table

18

.

6. Scan the ENTER/EXIT barcode to exit Label ID entry.

7. Scan the ENTER/EXIT barcode once again to exit Programming Mode.

This completes the steps to configure a Label ID for a given symbology.

Prefix

Suffix

Label ID

Label ID

Bar Code Data

Aim ID