Datalogic Scanning I GD4100 Manual Do Utilizador

Datalogic 2 of 5

Product Reference Guide

This feature specifies one of the barcode lengths for 

Datalogic 2 of 5 Length Control

. Length 1 is 

the minimum label length if in 

Variable Length

 Mode, or the first fixed length if in 

Fixed Length

Mode. The length includes the barcode’s check and data characters.

The length can be set from 2 to 50 characters in increments of two.

Follow these instructions to set this feature:

1. Determine the desired character length (from 2 to 50). The length must be an even num-

ber.

2. Pad the result with leading zeroes to yield two digits. For example: 0 = 00, 5 = 05, 20 = 20, 

etc.

3. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Programming 

Mode.

4. Scan the barcode: SELECT I 2 of 5 LENGTH 1 SETTING.

5. Scan the appropriate two digits from the keypad in 

Appendix E, Keypad

, that represent the 

length setting which was determined in the steps above. You will hear a two-beep indica-
tion after the last character.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming 

Mode.

This completes the procedure. See Table

27

 for some examples of how to set this feature.

2 Characters

6 Characters

14 Characters

50 Characters

02

06

14

50

Appendix E, Keypad

 ‘0’ and ‘2’

 ‘0’ and ‘6’

‘1’ and ‘4’

‘5’ AND ‘0’