Datalogic Scanning I GD4100 Manual Do Utilizador

RS-232/USB-Com Interfaces

Gryphon™ I GD4100

This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII 
characters or any hex value from 0 to 0xFF can be selected.

To set this feature:

1. Determine the desired character or value.

2. Use the 

ASCII Chart

 on the inside back cover of this manual to find the hex equivalent for 

the desired character/value.

3. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Programming 

Mode.

4. Scan the barcode: SELECT ACK CHARACTER SETTING.

5. Scan the appropriate two alpha-numeric characters from the keypad in 

Appendix E, Key-

pad

, that represent the desired character/value in step 1 above. The second character will 

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming 

Mode.

This completes the procedure. See Table

8

 for some examples of how to set this feature.

ACK

$

@

>

0x06

 0x24

0x40

0x3E

Appendix E, Keypad

‘0’ and ‘6’

‘2’ and ‘4’

‘4’ and ‘0’

‘3’ AND ‘E’

Data 

Bits