Datalogic Scanning I GD4100 Manual Do Utilizador

RS-232/USB-Com Interfaces

Gryphon™ I GD4100

This feature specifies the number of times the reader retries a label transmission due to a retry 
condition. The selectable range is from 1 to 254 retries. A selection of 0 disables the count, and 
a selection of 255 specifies unlimited retries.

To set this feature:

1. Determine the desired setting.

2. Pad the number with leading zeroes to yield three digits. For example: 0 = 000, 5 = 005, 

20 = 020, etc.

3. Scan the ENTER/EXIT PROGRAMMING MODE barcode to enter Programming 

Mode.

4. Scan the barcode: SELECT ACK NAK RETRY COUNT SETTING.

5. Scan the appropriate three digits from the keypad in 

Appendix E, Keypad

, that represent the 

number which was determined in the steps above. You will hear a two-beep indication 
after the last character.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming 

Mode.

This completes the procedure. See Table

11

 for some examples of how to set this feature.

Disable Retry 

Count

3 Retries

54 Retries 

Unlimited Retries

000

003

054

255

Appendix E, Keypad

‘0’, ‘0’ and ‘0’

‘0’, ‘0’ and ‘3’

‘0’, ‘5’ and ‘4’

‘2’, ‘5’ and ‘5’