Datalogic Scanning MX30 Manual Do Utilizador

GRYPHON™ Dx30/Mx30 

 

 
 

 
You can install NiMh or Alkaline AA batteries in the Gryphon™ Mx30. 
 
 

 
Once the system is connected and powered, you can place the Gryphon™ Mx30 into 
the cradle to charge the battery. 
 
When the scanner is correctly inserted in the cradle, the red LED on the cradle goes on 
to indicate that the battery is charging. The green LED on the cradle goes on when the 
battery is completely charged. 
 
When using NiMh batteries, frequent recharging before fully discharging can cause a 
“memory effect” in which the batteries assume a reduced capacity. 
 
Since it is not practical to wait for the reader to be fully discharged before recharging it, 
the OM-Gryphon™ and the C-Gryphon™ are provided with a battery-reconditioning 
feature which overcomes the “memory effect” problem. 
 
To perform battery reconditioning, simply press the battery-reconditioning key on the 
cradle control panel: the battery will be fully discharged in a short period of time (red 
LED flashing), then automatically recharged. 
 
We recommend performing the battery reconditioning once every few months or 
whenever you feel the battery capacity has decreased. 
 
 

8