Fujitsu DL7400 Manual Do Utilizador

 

4.  Open the front cover of the printer and remove the ribbon 

cartridge. Using a soft vacuum brush, gently vacuum the platen, 
print head carriage, and surrounding areas. You can easily slide 
the print head to the left or right when the power is off. Be 
careful not to press too hard on the flat ribbon cable that extends 
from the print head carriage. 

 

6.  Raise the paper table and rear stacker. Vacuum the forms 

tractors and surrounding areas. 

Clean the platen about once a month to remove excess ink. Use the 
platen cleaner recommended by your supplier and proceed as follows: 

1.  Apply a small amount of platen cleaner to a soft cloth. Avoid 

spilling platen cleaner inside the printer. 

2.  Place the cloth against the platen. 

3.  To dry the platen, place a dry cloth against the platen. 

 

5.  Re-install the ribbon cartridge. Close the front cover.