Fujitsu DL7400 Manual Do Utilizador

[Mounting the tractor unit] 

1)  Position the U-shaped slots on both sides of the tractor unit over 

the guide pins of the printer unit.  (To set the tractor unit in 
position, line it up with the groove of the left guide pin.  The 
right guide pin has no groove). 

2)  Push down the shaft at the front of the tractor unit until it locks 

with an audible click.  (Do not press the lock levers when 
pushing down the shaft.) 

 

3)  Verify that the hooks on both sides of the tractor unit are 

securely hooked onto guide pin 2 as shown in the following 
figure.