Fujitsu DL7400 Manual Do Utilizador

The first three MENU1 items and their options are shown below. 
Items are enclosed in single brackets < >. 

< EMULATE>DPL24C+   XL24E   ESC/P2 
 
<FONT    > 
COUR 10  PRSTG12  COMPRSD  BOLDFCE  PICA 10  CORRESP  OCR-B    OCR-A    COUR-N    COUR-B
COUR-I   N.SAN-N  N.SAN-B  N.SAN-I  TIMLS-N  TIMLS-B  TIMLS-I  DOWNLD0  DOWNLD1 
 
<QUALITY>LETTER   REPORT   DRAFT    HI-DRFT 

To select an option from the <item> menu: 

1.  Repeatedly press the “TEAR OFF” or “LOAD” button to 

position the cursor on the left edge of the aluminum print guide 
at the option you require. 

2. Press 

the 

T button to select the option. The printer prints the 

next item and its options. You can press S to select the option.  
Then, the printer prints the previous item and its options. 

3.  After selecting the desired options, press the ONLINE button to 

reprint the <<FUNCTION>> menu. 

For each item, the short-underlined option is the current default 
option (the option currently saved in the printer’s permanent 
memory). In the previous example, the default options are 
Fujitsu DPL24C PLUS emulation, Courier 10 font, and letter 
print quality. 

The chart on the next page summarizes how to select options such as 
emulation, font, and print quality and how to use functions that do not 
have options. 

To become familiar with setup mode, try the following example. This 
example shows how to change the font and pitch in MENU2 to Prestige 
Elite 12 and 12 cpi. 

Press the AUTO GAP and HI IMPACT buttons simultaneously 
until the printer beeps. 

Wait for the printer to stop printing and press the “TEAR OFF” 
or “LOAD” button twice to position the cursor on the left edge 
of the aluminum print guide at MENU2. Press the “S” button 
or the “T” button to select the MENU2 function and print the 
<EMULATE> item and its options.