Lexmark 4402-001 Manual Do Utilizador
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
2-8
Service Manual
4402-001
CCD Module Assembly Service Check
•
The CCD (charged coupled device) Module will not move during
POST Test.
POST Test.
•
The CCD lamp does not come on when CCD module assembly
moves.
moves.
FRU
Action
1
CCD Module Assembly
If CCD module will not move, go to
the
the
Note: If the printer is not
connected to the PC and
Lexmark Scan and Copy Control
program is not opened, the CCP
lamp will not come on.
connected to the PC and
Lexmark Scan and Copy Control
program is not opened, the CCP
lamp will not come on.
If lamp does not come on as CCD
module assembly is scanning or
moving, check connector (J7) on the
system board. If connected and the
lamp still does not work, replace the
CCD module assembly. If the lamp
does not correct the problem after
the CCD replacement, replace the
system board. See
module assembly is scanning or
moving, check connector (J7) on the
system board. If connected and the
lamp still does not work, replace the
CCD module assembly. If the lamp
does not correct the problem after
the CCD replacement, replace the
system board. See
for more
information.
To unlock scanner, press the red
lever down. The lever is located by
the USB plug on the rear of the
machine.
lever down. The lever is located by
the USB plug on the rear of the
machine.
Note: Unlock scanner before use.