Samsung SCX-6555NX Manual Do Utilizador
105
Scanning problems
Fax problems
Toner cartridge
produces fewer
copies than expected
before running out of
toner.
•
Your originals may contain pictures, solids,
or heavy lines. For example, your originals
may be forms, newsletters, books, or other
documents that use more toner.
•
The machine may be turned on and off
frequently.
•
The scanner lid may be left open while
copies are being made.
CONDITION
SUGGESTED SOLUTIONS
The scanner does
not work.
•
Make sure that you place the original to be
scanned face down on the scanner glass, or
face up in the DADF.
•
There may not be enough available memory
to hold the document you want to scan. Try
the Prescan function to see if that works. Try
lowering the scan resolution rate.
•
Check that the printer cable is connected
properly.
•
Make sure that the printer cable is not
defective. Switch the cable with a known
good cable. If necessary, replace the cable.
•
Check that the scanner is configured
correctly. Check scan setting in the
SmarThru Configuration or the application
you want to use to make certain that the
scanner job is being sent to the correct port.
The unit scans very
slowly.
•
Check if the machine is printing received
data. If so, scan the document after the
received data has been printed.
•
Graphics are scanned more slowly than text.
•
Communication speed slows in scan mode
because of the large amount of memory
required to analyze and reproduce the
scanned image. Set your computer to the
ECP printer mode through BIOS setting. It
will help to increase the speed. For details
about how to set BIOS, refer to your
computer user’s guide.
CONDITION
SUGGESTED SOLUTIONS
Message appears on
your computer
screen:
•
“Device can't be
set to the H/W
mode you want.”
•
“Port is being used
by another
program.”
•
“Port is Disabled.”
•
“Scanner is busy
receiving or
printing data.
When the current
job is completed,
try again.”
•
“Invalid handle.”
•
“Scanning has
failed.”
•
There may be a copying or printing job in
progress. Try your job again when that job is
finished, try your job again.
•
The selected port is currently being used.
Restart your computer and try again.
•
The printer cable may be improperly
connected or the power may be off.
•
The scanner driver is not installed or the
operating environment is not set up properly.
•
Ensure that the machine is properly
connected and the power is on, then restart
your computer.
•
The USB cable may be improperly
connected or the power may be off.
CONDITION
SUGGESTED SOLUTIONS
The machine is not
working, there is no
display and the
buttons are not
working.
•
Unplug the power cord and plug it in again.
•
Ensure that there is power being supplied to
the electrical outlet.
No dial tone sounds.
•
Check that the phone line is properly
connected.
•
Check that the phone socket on the wall is
working by plugging in another phone.
The numbers stored
in memory do not
dial correctly.
Make sure that the numbers are stored in
memory correctly. Print a Fax Phone Book
The original does not
feed into the
machine.
•
Make sure that the paper is not wrinkled and
you are inserting it in correctly. Check that
the original is the right size, not too thick or
thin.
•
Make sure that the DADF is firmly closed.
•
The DADF rubber pad may need to be
replaced. Contact a service representative.
Faxes are not
received
automatically.
•
The receiving mode should be set to Fax.
•
Make sure that there is paper in the tray.
•
Check to see if the display shows any error
message. If it does, clear the problem.
The machine does
not send.
•
Make sure that the original is loaded in the
DADF or on the scanner glass.
•
Check the fax machine you are sending to,
to see if it can receive your fax.
CONDITION
SUGGESTED SOLUTIONS