Samsung SCX-6555NX Manual Do Utilizador

You can set the default values for copy, fax, email, scan and paper all at 

once. 
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad 

and press OK. (See "Setting the authentication password" on page 30.)

4. Press the General tab > Default Settings > Default Option.
5. Press the function you want to change, and change its settings.

For example, if you want to change the default setting of the brightness 

& darkness for a copy job, press Copy > Darkness and adjust the 

brightness & darkness.

6. Press OK.

This program is for the network IP setting using the MAC address which is 

the hardware serial number of the network printer card or interface. 

Especially, it helps the network administrator set several network IPs at the 

same time. 
The following procedure is based on windows XP. If you use Macintosh or 

Linux OS, see Software section

1. Insert the driver CD provided along with your machine. When the driver 

CD runs automatically, close the window.

2. Start Windows Explorer and open the X drive. (X represents the name 

of your CD-ROM drive.)

3. Double-click Application > SetIP.
4. Open the folder of the language you plan to use.
5. Double-click Setup.exe to install this program. 
6. Follow the onscreen instructions to complete the installation.

1. Print the machine’s network configuration report to find your machine’s 

MAC address.  (See "Printing a report" on page 82.)

2. From the Windows Start menu, select All Programs > Samsung 

Network Printer Utilities > SetIP.

3. Click 

 to open the TCP/IP configuration window.

4. Enter the network card's MAC address, IP address, subnet mask, 

default gateway, and then click Apply.

5. Click OK, and then the machine prints the network information. Check 

all the settings are correct.

6. Click Exit.

If the optional tray is not installed, the tray options on the screen is 

grayed out.

•

You can only use SetIP program when your machine is connected 

to a network.

•

The following procedure is based on the Windows XP operating 

system. If you are using Macintosh or Linux, See Software section.

•

http://

developer.apple.com/networking/bonjour/download/

, select the 

program Bonjour for Windows due to your computer operating 

system, and install the program. This program will allow you to fix 

the network parameter automatically. Follow the instruction in the 

installation window. This Bonjour program does not support Linux

•

You can only use IPv4 setting for SetIP.

When you enter the MAC address, enter it without a colon(:).