Samsung SCX-6555NX Manual Do Utilizador

5. Enter Remote Fax No, Mailbox No., and Passcode. All these field are 

filled with information from the receiver.

 

6. Press OK.

You can set the machine to print a report whether a fax transmission is 

successfully completed or not.

1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Print/Report tab > Report > Fax Report > Fax Send Report.
4. Press On.

 

5. Press OK.

You can set the machine to send a fax in toll save time to save a telephone 

fee. If you send a fax after setting this feature, fax data will be stored in 

machine's memory and the machine will start to send fax in toll save time. 
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Toll Save.

6. Press On.

 

7. Press Start Time and set the start date and time with left/right arrows.
8. Press OK.
9. Press End Time and set the end date and time with left/right arrows.
10. Press OK.
11. Press OK.

You can add additional documents to the delayed fax job which is saved in 

memory.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup.
4. Press down arrow on the right side.
5. Press Send Batch.
6. Press On.
7. Press OK.

•

When you send a fax, if a fax number is same as the number in delay 

fax, the machine asks whether you want to add more documents to 

reserved delay fax.

You can set the machine to forward the received or sent fax to other 

destination by a fax or an email. If you are out of office but have to receive 

the fax, this feature may be useful.

You can set the machine to forward every fax you sent to other destination 

by faxing.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK. (See "Setting the authentication password" on 

3. Press the Setup tab > Fax Setup.

The detailed information is available in advanced setup part. (See 

•

When you forward a fax by an email, you firstly set the mail server 

and IP address in SyncThru Web Service.

•

If  this  Fax Forward Settings feature to On, you cannot use a fax 

with the On Hook Dial button on the control panel.