Samsung SCX-6555NX Manual Do Utilizador

You may set up the network with the machine's touch screen. Before doing 

that, you must have the information concerning the type of network 

protocols and computer system you use. If you are not sure which setting to 

use, contact your network administrator to configure this machine network.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter 

password and press OK.

3. Press the Setup tab > Network Setup.

This feature lets you control and lock all outgoing data, or change the 

password. 
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter 

password and press OK.

3. Press the Setup tab > Authentication.

Select appropriate protocol and configure 

parameters to use the network environment. 

There are lots of parameters to be set, 

therefore, if you are not sure, leave as it is, 

or consult the network administrator.

Configure the network transmission speed.

Reverts the network settings to the default values.

You can select the user authentication for network 

communication.

For details information consult the network admin-

istrator.

Selects this option to use the network environment 

through IPv6. 

It disables Authentication Mode.

It enables the authentication mode 
which can be used for Job 

Accounting Plug-in the 

SyncThru™ Web Admin Service.

You can set the local account for a 

certain user. If the user with that 

account performs the printing job, 

the machine counts it. 

When you install the optional FDI 

kit, select Foreign Device 

Interface Configuration Setup to 

activate it.

•

Job Timer: If there is not 

enough credit, you can set the 

machine to cancel a job right 

away or wait a designated 

amount of time for a deposit.

•

Print Job Control: When it is 

enabled, the both computer 

printing and copying are 

possible since the credit 

remains. With Disable, only 

the copy printing job needs the 

credit. (which means a 

computer printing a report or a 

fax job needs no credits)

•

Inhibit Services: When no 

credit is left, the machine 

disables the copy job only with 

Copy Only. With All Services, 

scanning service and copy job 

are disabled.