Vidikron VP-42HD Manual Do Utilizador

41

4. Once the adjustment is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once again. 

Setting the allocation of the audio connectors
Setting the AUDIO 1, 2, and 3 connectors to the desired input. 
Example: Setting “AUDIO INPUT1” to “VIDEO 2” 
Press  the  MENU  button  on  the  remote  control  to  display  the 
MAIN MENU on the screen, then...
1. Use the   and   buttons to select “AUDIO SETUP”, then press 
the MENU button. The “AUDIO SETUP” screen appears.
2. Use the   and   buttons to select “AUDIO INPUT1”.
3. To set the AUDIO INPUT1 to “VIDEO2”... 
Use the   and   buttons to select “VIDEO2”. 
The mode switches as follows each time the    and 

 buttons is 

pressed: 
The available sources depend on the setting of “BNC INPUT”.
RGB:     

→ VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD1 ← 

              → RGB3 ↔ RGB2 ↔ RGB1 ←

COMP:  

→ VIDEO1↔ VIDEO2 ↔ VIDEO3 ↔ HD/DVD1 ← 

              → RGB3 ↔ RGB1 ↔ HD/DVD2 ←

4. Once the adjustment is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more. 

BASS  

    

 

            

0

TREBLE  

 

              0

BALANCE 

 

            0

AUDIO INPUT1

  :      VIDEO 2

AUDIO INPUT2  :      HD 1

AUDIO INPUT3  :      RGB 1

AUDIO SETUP

SEL.              ADJ.                    EXIT

A single audio input cannot be selected as the audio 

channel for more than one input terminal.

Select “FACTORY” under the SETTING 1 menu.

Note  that  this  also  restores  other  settings  to  the 

factory defaults.