Hitachi HTS543212L9SA00 Manual Do Utilizador
5K320 SATA OEM Specification
163
14.44 Write DMA (CAh/CBh)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
-
- - - -
- - - Data
-
- - - - - - -
Feature
-
- - - -
- - - Error
...See Below...
Sector Count
V V V V V V V V Sector Count
V V V V V V V V
LBA Low
V V V V V V V V LBA Low
V V V V V V V V
LBA Mid
V V V V V V V V LBA Mid
V V V V V V V V
LBA High
V V V V V V V V LBA High
V V V V V V V V
Device
- L - - H H H H Device
-
- - - H H H H
Command
1 1 0 0 1 0 1 R Status
...See Below...
Error Register
Status Register
7
6
5
4
3
2
1
0
7
6
5
4
3
2
1
0
CRC UNC
0
IDN
0
ABT T0N
AM
N
BSY RDY
DF
DSC DRQ COR IDX ERR
V
0
0
V
0
V
0
0
0
V
V
V
-
0
0
V
Table 128 Write DMA Command (CAh/CBh)
The Write DMA command transfers one or more sectors of data from the host to the device, then
the data is written to the disk media.
The sectors of data are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. Data transfers are
qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one
interrupt per command to indicate that data transfer has terminated and status is available.
If an uncorrectable error occurs, the write will be terminated at the failing sector.
the data is written to the disk media.
The sectors of data are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. Data transfers are
qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one
interrupt per command to indicate that data transfer has terminated and status is available.
If an uncorrectable error occurs, the write will be terminated at the failing sector.
Output Parameters To The Device
Sector Count
Sector Count
The number of continuous sectors to be transferred. If zero is specified, then 256 sectors
will be transferred.
will be transferred.
LBA Low
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
(L=1)
H
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
R
The retry bit, but this bit is ignored.
Input Parameters From The Device
Sector Count
Sector Count
The number of requested sectors not transferred. This will be zero, unless
an unrecoverable error occurs.
an unrecoverable error occurs.
LBA Low
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
H
The head number of the last transferred sector. (L=0) In LBA mode, this register
contains current LBA bits 24 - 27. (L=1)
contains current LBA bits 24 - 27. (L=1)