Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Hitachi
  4. HTS543212L9SA00
  5. Manual Do Utilizador

Hitachi HTS543212L9SA00 Manual Do Utilizador

Download
Página de 177
 
                       5K320 SATA OEM Specification 
89 
 
14.7  Format Track (50h: Vendor Specific)   
Command Block Output Registers 
   Command Block Input Registers 
Register 
7  6  5  4  3  2  1  0     Register 
7  6  5  4  3  2  1  0 
Data 
- 
-  -  -  - 
-  -  -     Data 
- 
-  -  -  -  -  -  - 
Feature 
- 
-  -  -  - 
-  -  -     Error 
...See Below... 
Sector Count 
- 
-  -  -  - 
-  -  -     Sector Count 
- 
-  -  -  -  -  -  - 
LBA Low  
V  V  V  V  V  V  V  V     LBA Low  
V  V  V  V  V  V  V  V 
LBA Mid 
V  V  V  V  V  V  V  V     LBA Mid 
V  V  V  V  V  V  V  V 
LBA High 
V  V  V  V  V  V  V  V     LBA High 
V  V  V  V  V  V  V  V 
Device 
-  L  -  -  H   H   H  H     Device 
- 
-  -  -  H   H   H   H 
Command 
0  1  0  1  0  0  0  0     Status 
...See Below... 
 
Error Register 
  
Status Register 
7 
6 
5 
4 
3 
2 
1 
0 
  
7 
6 
5 
4 
3 
2 
1 
0 
CRC  UNC 
0 
IDN 
0 
ABT   T0N 
AM
N 
   BSY  RDY 
DF 
DSC  DRQ   COR  IDX  ERR 
0 
0 
0 
V 
0 
V 
0 
0 
  
0 
V 
0 
V 
- 
0 
0 
V 
Table  52 Format Track Command (50h)   
The Format Track command formats a single logical track on the device. Each good sector of data on 
the track will be initialized to zero with write operation. At this time, whether the sector of data is 
initialized correctly is not verified with read operation. Any data previously stored on the track will 
be lost.   
Output Parameters To The Device  
LBA Low 
In LBA mode, this register specifies LBA address bits 0 - 7 to be formatted. (L=1) 
LBA High/Mid 
The cylinder number of the track to be formatted. (L=0) 
In LBA mode, this register specifies LBA address bits 8 - 15 (Mid), 16 - 23 (High) to be 
formatted. (L=1) 
H 
The head number of the track to be formatted. (L=0) 
In LBA mode, this register specifies LBA address bits 24  - 27 to be formatted. (L=1) 
Input Parameters From The Device 
LBA Low 
In LBA mode, this register specifies current LBA address bits 0 -7. (L=1) 
LBA High/Mid 
In LBA mode, this register specifies current LBA address bits 8 - 15 (Mid), 16 - 23 (High) 
H 
In LBA mode, this register specifies current LBA address bits 24 - 27. (L=1) 
 
In LBA mode, this command formats a single logical track including the specified LBA.