Fujitsu MBA3147RC Manual Do Utilizador

 

 Bit 
Byte 

7 6 5 4 3 2 1 0 

0 X'5A' 

1 

0 0 0 0 

DBD

0 0 0 

2 PC 

Page 

Code 

3 

Sub Page Code 

4 

0 0 0 0 0 0 0 0 

5 

0 0 0 0 0 0 0 0 

6 

0 0 0 0 0 0 0 0 

7 

Transfer Byte Length  (MSB) 

8 

Transfer Byte Length  (LSB) 

9 

0 0 0 0 0 0 0 0 

 

This command reports the values for each type of parameter related to the disk 
drive's physical attributes, data format, timing of SAS interface transferring 
processing, error recovery procedures, etc., as well as the attributes of those 
parameters, to the INIT. 

The functions of this command are the same as those of the Group 0 MODE 
SENSE command (Section 4.1.6) except that the format of data (MODE SENSE 
data) transferred to the INIT differs somewhat. 

Table 4.18 lists the data configuration of the parameter list (MODE SENSE data) 
transferred to the INIT by this command.  Compared to the 4-byte header in the 
case of a Group 0 MODE SENSE command, an 8-byte header is transferred in this 
command.  The meanings of each field and bit in the header are the same as in the 
case of the Group 0 MODE SENSE command, except that the byte positions differ.  
Also, the contents of the other parameters (block descriptor and page descriptors) 
are the same as in the case of the Group 0 MODE SENSE command. 

174 

C141-C013