Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Fujitsu
  4. MBC2073RC
  5. Manual Do Utilizador

Fujitsu MBC2073RC Manual Do Utilizador

Download
Página de 439
 
4.2   Data Access Commands  
 
C141-C013 
215 
4.2.2  READ EXTENDED (28)  
 
 
Bit 
Byte 
7 
6 
5 
4 
3 
2 
1 
0 
0 
X'28' 
1 
0 
0 
0 
×
 
FUA 
0 
0 
0 
2 
Logical Block Address (MSB) 
3 
Logical Block Address 
4 
Logical Block Address 
5 
Logical Block Address (LSB) 
6 
0 
0 
0 
0 
0 
0 
0 
0 
7 
Transfer Block Count (MSB) 
8 
Transfer Block Count (LSB) 
9 
0 
0 
0 
0 
0 
0 
0 
0 
 
This command reads the number of blocks of data in continuous logical data 
blocks specified in the "Transfer block count" field with the logical data block on 
the disk media specified in the "Logical block address" field in the CDB as the 
top. 
The functions of this command are the same as those of the Group 0 READ 
command (Section 4.2.1) with the exception that it is possible to specify 4-byte 
logical block addresses and 2-byte transfer block counts.  However, when zero is 
specified for the "Transfer block count," the command is terminated normally 
without seek and pre-fetch being performed. 
• 
FUA (force unit access) 
When this bit is "0", it indicates that the HDD satisfy the command by 
accessing the cache memory.  Any logical blocks that are contained in the 
cache memory may be transferred to the INIT directly from the cache 
memory. 
When this bit is "1", it indicated that the HDD shall access the media in 
performing the command prior to returning GOOD status.  READ commands 
shall access the specified logical blocks from the media (i.e., the data is not 
directly retrieved from the cache).