Fujitsu MBC2073RC Manual Do Utilizador
SAS Interface
24
C141-C013
1.1.2 Physical links and phys
A physical link is a set of four wires used as two differential signal pairs. One
differential signal transmits in one direction while the other differential signal
transmits in the opposite direction. Data may be transmitted in both directions
simultaneously.
differential signal transmits in one direction while the other differential signal
transmits in the opposite direction. Data may be transmitted in both directions
simultaneously.
A physical phy contains a transceiver which electrically interfaces to a physical
link, which attaches to another physical phy.
link, which attaches to another physical phy.
Phys are contained in ports. Phys interface to the service delivery subsystem.
Figure 1.3 shows two phys attached with a physical link.
Figure 1.3 shows two phys attached with a physical link.
An attached phy is the phy to which a phy is attached over a physical link. A
device may contain one or more phys. Each phy has a phy identifier which is
unique within the device.
device may contain one or more phys. Each phy has a phy identifier which is
unique within the device.
Figure 1.3 Physical links and phys
1.1.3 Ports (narrow ports and wide ports)
A port contains one or more phys. Ports in a device are associated with physical
phys based on the identification sequence. A port is created from a set of physical
phys if one or more physical phys contained within a device:
phys based on the identification sequence. A port is created from a set of physical
phys if one or more physical phys contained within a device:
a) transmit the same SAS address during the identification sequence; and
b) receive the same SAS address during the identification sequence (i.e., the
corresponding attached phy or phys transmit the same SAS address).