Fujitsu MBC2073RC Manual Do Utilizador

56 

C141-C013 

Meanwhile, when a drive receives the DONE primitive, the drive performs the 
following processing: 

1)  If the drive has SSP frames to send at the time of the receipt of the DONE 

primitive from the initiator, the drive can send as many SSP frames as there 
are credits being held at this time. 

2)  If the drive has no SSP frames to send at the time of the receipt of the DONE 

primitive from the initiator, the drive sends the DONE (NORMAL) primitive. 

The side that has sent the DONE primitive cannot send the SSP primitive until 
connection is established again after the current connection is temporarily closed. 

EOF specifies the end of an SSP or SMP frame. 

The NAK primitive indicates that an SSP frame cannot be received normally.  
When a drive receives an SSP frame, and the drive detects a CRC error after 
checking the CRC field in the SSP frame, the drive sends the NAK primitive. 

If a received SSP frame contains the ERROR primitive or an invalid dword, the 
drive sends the NAK primitive even if the CRC field in the SSP field is correct. 

During connection, when a drive detects the state where it can receive an SSP 
frame, the drive sends an RRDY primitive to indicate that the connecting 
companion can send the SSP frame. 

When the OPEN_ACCEPT primitive is transferred, a drive will send up to three  
RRDY primitives. 

The sending side of the SSP frame cannot receive the SSP frame before sending 
RRDY primitives (before the sending side obtains credits).  If a drive receives 
more SSP frames than the RRDY primitives it has sent, the drive discards the 
surplus SSP frames. 

SOF specifies the start of an SSP or SMP frame.