Fujitsu MBA3073RC Manual Do Utilizador

Página de 100
 
 
C141-E252 
Important Alert Items 
Important Alert Messages 
The important alert messages in this manual are as follows: 
 
 
A hazardous situation could result in minor or moderate personal injury if the 
user does not perform the procedure correctly.  Also, damage to the product 
or other property, may occur if the user does not perform the procedure 
correctly. 
 
Task Alert 
message 
Page 
Installation 
Damage 
Never remove any labels from the HDD or deface them in any way. 
 
44 
 
High temperature 
To prevent injury, never touch the HDD while it is hot.  The DE and LSI 
become hot during operation and remain hot immediately after turning off 
the power. 
 
55, 64 
 
Damage 
1.  When dismounting the HDD which is mounted on the system while 
power is supplied to it. 
1)  Stop the spindle motor by a START/STOP UNIT  command.  It takes 
about 30 seconds for the spindle motor to stop completely. 
2)  Then, dismount the HDD using the drive mounting/dismounting 
mechanism, etc. of the system.  When removing the HDD, avoid exposing 
it to shock or vibration.  Just in case, stop dismounting once when SAS 
connector breaks off contact and wait until the spindle motor stops 
(about 30 seconds.). 
 
64 
 
2.  When dismounting the HDD which is mounted on the system while 
power is not supplied to it. 
• 
Dismount the HDD using the HDD mounting/dismounting 
mechanism, etc. of the system.  When removing the HDD, avoid 
exposing it to shock or vibration. 
3.  When storing or transporting the HDD, put it in the antistatic case 
(Fcell) (refer to Section 5.1 and 6.5).