Fujitsu MCM3130SS Manual Do Utilizador
C156-E228-02EN 6-1
CHAPTER 6 Diagnostics and Maintenance
This chapter provides diagnostics and maintenance information.
6.1 Diagnostics
Table 6.1 lists test items during diagnostics.
The optical disk drive has a self-diagnostics function. This function can check the
normality of basic operations of the drive.
normality of basic operations of the drive.
To check the generation operations including the operations of the interface with
the host system, provide a test program that can run in the host system (see Section
6.1.3).
the host system, provide a test program that can run in the host system (see Section
6.1.3).
Table 6.1 Diagnostics function
Description of diagnostics
Diagnostics item
Initial self-diagnostics
Basic operations
(hardware function test)
(hardware function test)
Diagnostic command
Basic operations
Test program
General operations
6.1.1 Initial self-diagnostics
When the power is turned on, the optical disk drive executes initial self-
diagnostics. The initial self-diagnostics tests basic hardware operations.
diagnostics. The initial self-diagnostics tests basic hardware operations.
The hardware function test checks the normality of the basic operations of the
controller. This test includes the normality check of the ROM that stores
microcodes, microprocessor (MPU) peripheral circuit test, memory (RAM) test,
and data buffer test.
controller. This test includes the normality check of the ROM that stores
microcodes, microprocessor (MPU) peripheral circuit test, memory (RAM) test,
and data buffer test.
The LED on the drive front panel blinks if an error is detected during initial self-
diagnostics.
diagnostics.
6.1 Diagnostics
6.2 Maintenance
Information