Fujitsu MHN2100AT Manual Do Utilizador
Interface
5-92
C141-E120-02EN
device to starting of the sector data transfer. Note that the host does
not need to read the Status register for the reading of a single sector
or the last sector in multiple-sector reading. If the timing to read
the Status register does not meet above condition, normal data
transfer operation is not guaranteed.
not need to read the Status register for the reading of a single sector
or the last sector in multiple-sector reading. If the timing to read
the Status register does not meet above condition, normal data
transfer operation is not guaranteed.
When the host new command even if the device requests the data
transfer (setting in DRQ bit), the correct device operation is not
guaranteed.
transfer (setting in DRQ bit), the correct device operation is not
guaranteed.
Figure 5.4 Protocol for command abort
5.4.2 PIO Data transferring commands from host to device
The execution of the following commands involves Data transfer from the host to
the drive.
the drive.
•
WRITE SECTOR(S)
•
WRITE LONG
•
WRITE BUFFER
•
WRITE VERIFY
•
SMART WRITE LOG SECTOR
•
SECURITY DISABLE PASSWORD
•
SECURITY ERASE UNIT
•
SECURITY SET PASSWORD
•
SECURITY UNCLOK