Fujitsu MAW3073NC/NP Manual Do Utilizador
C141-E226
5-3
5.2 Connections
Figure 5.1 shows examples of connection modes between the host system and the HDD. For the
16-bit SCSI, up to 16 devices including the host adapter, the HDD, and other SCSI devices can be
connected to the SCSI bus in arbitrary combinations. Install a terminating resistor on the SCSI
device connected to both ends of the SCSI cable.
16-bit SCSI, up to 16 devices including the host adapter, the HDD, and other SCSI devices can be
connected to the SCSI bus in arbitrary combinations. Install a terminating resistor on the SCSI
device connected to both ends of the SCSI cable.
See Section 4.3 for the cable connection requirements and power cable connections.
(1)
Connecting one drive
HDD