Fujitsu MDG3230UB Manual Do Utilizador

Página de 42
C156-F047-01EN
4-1
CHAPTER 4 RETURNING REPAIRED UNIT
4.1
Unpacking
4.2
Packing
4.3
Transportation
4.4
Storage
4.1 Unpacking
The following provides notes on unpacking a replacing MO disk drive:
 
Ensure flat and level working space, and pay attention to indication of upside
and downside on a package box.  Avoid placing the unit directly on a firm
desk, etc. Handle a unit on a soft material such as rubber mat, etc.
 
When removing cushions, pay attention not to strain an MO disk drive.
 
When taking a unit out of an anti-static plastic bag, pay extra attention not to
strain printed circuit surface and interface connectors.
 
If an MO disk drive is moved into a place where room temperature changes
by 10 degrees Celsius, leave the unit packed for more than 2 hours after
moving, for avoiding condensation.
4.2 Packing
The following provides notes on packing a replaced MO disk drive:
 
For packing, use the same cushions and a box as those provided upon delivery
of a unit.  If the same cushions and a box are unavailable, use a box with
cushions that do not give physical shock to an MO disk drive.
 
Pack an MO disk drive with an MO cartridge removed (with the carriage
locked).
 
When packing an MO disk drive, provide sufficient protection against damage
on printed circuit surface and interface connectors.
 
Put an MO disk drive into an anti-static plastic bag with desiccant.
 
Provide plainly visible signs indicating "THIS SIDE UP" and "HANDLE
WITH CARE" outside a box.
 
Other provided materials (AC adapter, cable, media, etc.) should be kept
separately.  Do not pack them with an MO disk drive.