Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
7.1 Thin Provisioning Pool Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
215
•
Total Capacity
The total capacity of FTSP is displayed.
The total capacity of FTSP is displayed.
•
Used Capacity
The used capacity of FTSP is displayed.
The used capacity of FTSP is displayed.
•
Balancing Level
The balancing level of the FTSP is displayed.
A "-" (hyphen) is displayed when the physically allocated capacity cannot be checked due to the storage
system status or when the balancing level cannot be obtained due to the FTRP status (*1).
The balancing level of the FTSP is displayed.
A "-" (hyphen) is displayed when the physically allocated capacity cannot be checked due to the storage
system status or when the balancing level cannot be obtained due to the FTRP status (*1).
*1:
The status of the FTRP is not "
Available", "
Partially Readying", or "
Exposed"
-
High
The physically allocated capacity among the RAID groups is equalized.
The physically allocated capacity among the RAID groups is equalized.
-
Middle
The physically allocated capacity among the RAID groups is slightly unequal.
The physically allocated capacity among the RAID groups is slightly unequal.
-
Low
The physically allocated capacity among the RAID groups is significantly unequal.
The physically allocated capacity among the RAID groups is significantly unequal.
7.1.9
Flexible Tier Pool Detail (Volume)
Click the [No.] link or the [Name] link on the
display the corresponding Flexible Tier Pool Details screen.
Click the [Volume] tab on the [Flexible Tier Pool Detail] to display a list of volumes that are registered in the
corresponding FTRP. Up to 100 volumes are displayed in a page. When no volumes are registered in the FTRP,
only the item name is displayed.
Click the [Volume] tab on the [Flexible Tier Pool Detail] to display a list of volumes that are registered in the
corresponding FTRP. Up to 100 volumes are displayed in a page. When no volumes are registered in the FTRP,
only the item name is displayed.
The following items are displayed in the Main area:
•
No.
The volume number is displayed.
The volume number is displayed.
•
Name
The volume name is displayed.
The volume name is displayed.
•
Status
The volume status is displayed. Refer to
The volume status is displayed. Refer to
for detailed information of volume
status.