Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 7 Thin Provisioning Pool Management
7.2 Functions in the Action Area for Thin Provisioning
7.2 Functions in the Action Area for Thin Provisioning
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
239
The procedure to format an unformat area in the Thin Provisioning Pool is as follows:
Procedure
1
Select the TPP to be formatted (multiple selections can be made) and click [Format
Unformatted Area] in [Action].
Unformatted Area] in [Action].
→ A confirmation screen appears.
2
Click the [OK] button.
→ Format of unformat area in the Thin Provisioning Pool starts.
3
Click the [Done] button to return to the [Thin Provisioning Pool] screen.
End of procedure
7.2.7
Modify Threshold Thin Provisioning Pool
This function changes the threshold for monitoring the used capacity of Thin Provisioning Pool. There are two
types of threshold: "Warning" and "Attention".
types of threshold: "Warning" and "Attention".
The procedure to change the threshold of a TPP is as follows:
Procedure
1
Select the TPP for which the threshold is to be changed (multiple selections can be made)
and click [Modify Threshold] in [Action].
and click [Modify Threshold] in [Action].
This function cannot be performed when there are no TPPs in the ETERNUS DX Disk storage system.
•
This function changes the threshold of a TPP that is created by using the procedure in
.
•
The same threshold can be applied for multiple TPP in a single operation.