Fujitsu DX8100 S2 Manual Do Utilizador

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Chapter 2  

Startup and Shutdown

This chapter describes how to start, exit, log in, and log out from GUI.

2.1

Startup of GUI

Startup the login screen for GUI.
Connect the PC and the ETERNUS DX Disk storage system using a LAN cable, and display the login screen via
the web browser.
The procedure to start up the login screen for GUI is as follows:

Directly connect the PC and MNT port of the ETERNUS DX Disk storage system via LAN cable.

Set the IP address and subnet mask for the PC to match the ETERNUS DX Disk storage system 
network settings.

Enter "http://IP address of the storage system/" to the address bar in the web browser 
(Default IP address is "192.168.1.1").

→ The login screen for GUI is displayed. Refer to 

 for detailed procedure to login.

When using SSL (https), the "SSL server certificate" or the "self-signed SSL certificate" must be 
registered in the ETERNUS DX Disk storage system in advance.

When registering "SSL server certificate"

a Send the CSR that is downloaded using the procedure in 

 

to the certification authority and obtain the "SSL server certificate".

b Register the obtained "SSL server certificate" by using the procedure in 

.

When registering "self-signed SSL certificate"

a Create the "self-signed SSL certificate" using the procedure in 

.

b Register the created "self-signed SSL certificate" in the ETERNUS DX Disk storage system as 

described in 

.

If Firefox 3.6.x is used for connecting to the ETERNUS DX Disk storage system via "https", a 
communication error may occur. This error can be avoided by connecting via "http" or by using 
"Internet Explorer".