Fujitsu DX8100 S2 Manual Do Utilizador
Chapter 9 Connectivity Management
9.1 Connectivity Status
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
396
9.1.8.5
Port QoS (Basic)
Follow the message in the Information area to configure a bandwidth limit on each port.
9.1.8.6
FC Port QoS
This function displays the bandwidth limit and the performance information of the FC ports that are registered
in the ETERNUS DX Disk storage system.
in the ETERNUS DX Disk storage system.
•
The ports with "CA" or "CA/RA" as the port mode that are registered by the ETERNUS DX Disk storage
system are displayed regardless of whether the ports belong to CA port groups or not.
system are displayed regardless of whether the ports belong to CA port groups or not.
•
This function displays the performance information that is obtained during performance monitoring
regardless of whether the Host-LU QoS mode is enabled or disabled. When the performance information
is displayed before performance monitoring is stopped, the performance information that was obtained
up to this point is displayed. This function displays the performance information of each port.
regardless of whether the Host-LU QoS mode is enabled or disabled. When the performance information
is displayed before performance monitoring is stopped, the performance information that was obtained
up to this point is displayed. This function displays the performance information of each port.