Fujitsu DX8100 S2 Manual Do Utilizador

Chapter 9  Connectivity Management
  9.2  Functions in the Action Area for Connectivity

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Click the [OK] button.

→ Modification of the FC port parameters starts.

Click the [Done] button to return to the [FC Port Group] screen.

9.2.3.8

Modify iSCSI Port Parameters

This function sets the connection information for the iSCSI ports that connect the ETERNUS DX Disk storage
system and the host or local and remote ETERNUS DX Disk storage systems.

If the Loop ID is changed while a PRIMEPOWER server is operating, reboot the server immediately. 
If the parameters do not satisfy the input conditions, an error screen appears.

If some parameters do not satisfy the input conditions, an error screen appears.

When changing port parameters during operation, stop access from the server that is allocated to the target 
port. Host access does not need to be stopped to change the port parameters of newly added CA ports.

There are three port modes for an iSCSI port; CA, RA, and CA/RA. CA is used for connecting to a server, RA 
is used for REC, and CA/RA is used for connecting to a server and for REC. To switch the port mode, refer to 

. The default value is "CA".

iSCSI-RA is a dedicated adapter that is used for REC between the local device and the ETERNUS DX400 
series, the ETERNUS DX8000 series, the ETERNUS4000, or the ETERNUS8000.

For more details on iSCSI-CA parameter settings, refer to "User’s Guide -Server Connection-" for each OS 
type.