Fujitsu DX8100 S2 Manual Do Utilizador

Chapter 9  Connectivity Management
  9.2  Functions in the Action Area for Connectivity

ETERNUS Web GUI User’s Guide

Copyright 2013 FUJITSU LIMITED

P2X0-1090-10ENZ0

Click the [Done] button to return to the [FC/FCoE Host QoS] screen.

9.2.7.7

Set iSCSI Host QoS

This function configures the bandwidth limit (the maximum performance limit) of the iSCSI host.

The procedure to set the iSCSI host QoS is as follows:

Select the iSCSI host to set the bandwidth limit (multiple selections can be made), and click 
[Set iSCSI Host QoS] in [Action].

This function can be used, irrespective of whether the Host-LU QoS has been enabled or disabled. However, if 
the Host-LU QoS has been disabled, the host starts operating within the configured bandwidth limit after the 
Host-LU QoS is enabled.

Configure the port bandwidth limit on each port. Refer to the following sections for details:

- "9.2.7.9 Set FC Port QoS" (page 610)
- "9.2.7.10 Set iSCSI Port QoS" (page 611)
- "9.2.7.11 Set SAS Port QoS" (page 613)
- "9.2.7.12 Set FCoE Port QoS" (page 614)

The LUN bandwidth limit can be configured in the LU QoS group. Refer to 

 for details.